Annals of Occupational and Environmental Medicine

Research Article

Automation of Workplace Lifting Hazard Assessment for Musculoskeletal Injury Prevention: June T Spector, Max Lieblich, Stephen Bao, Kevin McQuade, Margaret Hughes; Ann Occup Environ Med 2014;26:15-15. Published online June 24, 2014; DOI: https://doi.org/10.1186/2052-4374-26-15

Objectives

Existing methods for practically evaluating musculoskeletal exposures such as posture and repetition in workplace settings have limitations. We aimed to automate the estimation of parameters in the revised United States National Institute for Occupational Safety and Health (NIOSH) lifting equation, a standard manual observational tool used to evaluate back injury risk related to lifting in workplace settings, using depth camera (Microsoft Kinect) and skeleton algorithm technology.

Methods

A large dataset (approximately 22,000 frames, derived from six subjects) of simultaneous lifting and other motions recorded in a laboratory setting using the Kinect (Microsoft Corporation, Redmond, Washington, United States) and a standard optical motion capture system (Qualysis, Qualysis Motion Capture Systems, Qualysis AB, Sweden) was assembled. Error-correction regression models were developed to improve the accuracy of NIOSH lifting equation parameters estimated from the Kinect skeleton. Kinect-Qualysis errors were modelled using gradient boosted regression trees with a Huber loss function. Models were trained on data from all but one subject and tested on the excluded subject. Finally, models were tested on three lifting trials performed by subjects not involved in the generation of the model-building dataset.

Results

Error-correction appears to produce estimates for NIOSH lifting equation parameters that are more accurate than those derived from the Microsoft Kinect algorithm alone. Our error-correction models substantially decreased the variance of parameter errors. In general, the Kinect underestimated parameters, and modelling reduced this bias, particularly for more biased estimates. Use of the raw Kinect skeleton model tended to result in falsely high safe recommended weight limits of loads, whereas error-corrected models gave more conservative, protective estimates.

Conclusions

Our results suggest that it may be possible to produce reasonable estimates of posture and temporal elements of tasks such as task frequency in an automated fashion, although these findings should be confirmed in a larger study. Further work is needed to incorporate force assessments and address workplace feasibility challenges. We anticipate that this approach could ultimately be used to perform large-scale musculoskeletal exposure assessment not only for research but also to provide real-time feedback to workers and employers during work method improvement activities and employee training.

Citations

Citations to this article as recorded by

sEMG Spectral Analysis and Machine Learning Algorithms Are Able to Discriminate Biomechanical Risk Classes Associated with Manual Material Liftings
Leandro Donisi, Deborah Jacob, Lorena Guerrini, Giuseppe Prisco, Fabrizio Esposito, Mario Cesarelli, Francesco Amato, Paolo Gargiulo
Bioengineering.2023; 10(9): 1103. CrossRef
Tactile Gloves Predict Load Weight During Lifting With Deep Neural Networks
Guoyang Zhou, Ming-Lun Lu, Denny Yu
IEEE Sensors Journal.2023; 23(16): 18798. CrossRef
Using real-time feedback of L5/S1 compression force based on markerless optical motion capture to improve the lifting technique in manual materials handling
Christopher Brandl, Oliver Brunner, Pietro Marzaroli, Tobias Hellig, Laura Johnen, Alexander Mertens, Marco Tarabini, Verena Nitsch
International Journal of Industrial Ergonomics.2022; 91: 103350. CrossRef
Using Occupational Histories to Assess Heat Exposure in Undocumented Workers Receiving Emergent Renal Dialysis in Georgia
Daniel J. Smith, Valerie Mac, Lisa M. Thompson, Laura Plantinga, Lauren Kasper, Vicki S. Hertzberg
Workplace Health & Safety.2022; 70(5): 251. CrossRef
A Logistic Regression Model for Biomechanical Risk Classification in Lifting Tasks
Leandro Donisi, Giuseppe Cesarelli, Edda Capodaglio, Monica Panigazzi, Giovanni D’Addio, Mario Cesarelli, Francesco Amato
Diagnostics.2022; 12(11): 2624. CrossRef
The role of machine learning in the primary prevention of work-related musculoskeletal disorders: A scoping review
Victor C.H. Chan, Gwyneth B. Ross, Allison L. Clouthier, Steven L. Fischer, Ryan B. Graham
Applied Ergonomics.2022; 98: 103574. CrossRef
Classifying hazardous movements and loads during manual materials handling using accelerometers and instrumented insoles
Mitja Trkov, Duncan T. Stevenson, Andrew S. Merryweather
Applied Ergonomics.2022; 101: 103693. CrossRef
A Computer Vision Approach for Estimating Lifting Load Contributors to Injury Risk
Guoyang Zhou, Vaneet Aggarwal, Ming Yin, Denny Yu
IEEE Transactions on Human-Machine Systems.2022; 52(2): 207. CrossRef
Work-Related Risk Assessment According to the Revised NIOSH Lifting Equation: A Preliminary Study Using a Wearable Inertial Sensor and Machine Learning
Leandro Donisi, Giuseppe Cesarelli, Armando Coccia, Monica Panigazzi, Edda Maria Capodaglio, Giovanni D’Addio
Sensors.2021; 21(8): 2593. CrossRef
The Sensor-Based Biomechanical Risk Assessment at the Base of the Need for Revising of Standards for Human Ergonomics
Alberto Ranavolo, Arash Ajoudani, Andrea Cherubini, Matteo Bianchi, Lars Fritzsche, Sergio Iavicoli, Massimo Sartori, Alessio Silvetti, Bram Vanderborght, Tiwana Varrecchia, Francesco Draicchio
Sensors.2020; 20(20): 5750. CrossRef
Automation of mass spectrometric detection of analytes and related workflows: A review
Decibel P. Elpa, Gurpur Rakesh D. Prabhu, Shu-Pao Wu, Kheng Soo Tay, Pawel L. Urban
Talanta.2020; 208: 120304. CrossRef
Predicting Sagittal Plane Lifting Postures From Image Bounding Box Dimensions
Runyu L. Greene, Yu Hen Hu, Nicholas Difranco, Xuan Wang, Ming-Lun Lu, Stephen Bao, Jia-Hua Lin, Robert G. Radwin
Human Factors: The Journal of the Human Factors and Ergonomics Society.2019; 61(1): 64. CrossRef
The accuracy of a 2D video-based lifting monitor
Xuan Wang, Yu Hen Hu, Ming-Lun Lu, Robert G. Radwin
Ergonomics.2019; 62(8): 1043. CrossRef
Surface electromyography for risk assessment in work activities designed using the “revised NIOSH lifting equation”
Alberto Ranavolo, Tiwana Varrecchia, Sergio Iavicoli, Agnese Marchesi, Martina Rinaldi, Mariano Serrao, Silvia Conforto, Mario Cesarelli, Francesco Draicchio
International Journal of Industrial Ergonomics.2018; 68: 34. CrossRef
Risk factors identification and visualization for work-related musculoskeletal disorders with wearable and connected gait analytics system and kinect skeleton models
Diliang Chen, Yi Cai, Jiawei Cui, Jia Chen, Haotian Jiang, Ming-Chun Huang
Smart Health.2018; 7-8: 60. CrossRef
Wearable Monitoring Devices for Biomechanical Risk Assessment at Work: Current Status and Future Challenges—A Systematic Review
Alberto Ranavolo, Francesco Draicchio, Tiwana Varrecchia, Alessio Silvetti, Sergio Iavicoli
International Journal of Environmental Research and Public Health.2018; 15(9): 2001. CrossRef
Using RGB-D sensors and evolutionary algorithms for the optimization of workstation layouts
Jose Antonio Diego-Mas, Rocio Poveda-Bautista, Diana Garzon-Leal
Applied Ergonomics.2017; 65: 530. CrossRef
Letter regarding ‘Comparison between low-cost marker-less and high-end marker-based motion capture systems for the computer-aided assessment of working ergonomics’ by Patrizi et al. and research reproducibility

Ergonomics.2017; 60(4): 597. CrossRef
Inverse dynamics based on occlusion-resistant Kinect data: Is it usable for ergonomics?
Pierre Plantard, Antoine Muller, Charles Pontonnier, Georges Dumont, Hubert P.H. Shum, Franck Multon
International Journal of Industrial Ergonomics.2017; 61: 71. CrossRef
Response to letter by Spector and Lieblich
Alfredo Patrizi, Ettore Pennestrì, Pier Paolo Valentini
Ergonomics.2017; 60(4): 599. CrossRef
Evaluation of the Impact of the Revised National Institute for Occupational Safety and Health Lifting Equation
Ming-Lun Lu, Vern Putz-Anderson, Arun Garg, Kermit G. Davis
Human Factors: The Journal of the Human Factors and Ergonomics Society.2016; 58(5): 667. CrossRef
A Work-related Musculoskeletal Disorder Risk Assessment Platform using Smart Sensor
Byoung Gook Loh
Journal of the Korean Society of Safety.2015; 30(3): 93. CrossRef

294 View
4 Download
25 Web of Science
22 Crossref

First
Prev
Page of 1
Next
Last

Search