Annals of Occupational and Environmental Medicine

Case Report

A Case of Silicosis and Pneumothorax in a Workplace Producing Dental Porcerlain: Youngjoong Kang, Won Jun Choi, Sang Yun Lee, Jong Wan Yun, Hyung Sik Kim, Jong Uk Won, Sang Hwan Han; Korean Journal of Occupational and Environmental Medicine 2010;22(1):58-63. Published online March 31, 2010; DOI: https://doi.org/10.35371/kjoem.2010.22.1.58

Abstract PDF: BACKGROUND
Silicosis is more likely to occur in people working in the mining industry. However, workers suffering from silicosis have recently been reported frequently in other areas. We present a case of silicosis occuring in a 43-year-old man who had worked for 20 years in a workplace producing dental porcelain.
CASE
The man was admitted to the emergency room with acute chest pain caused by pneumothorax. Chest X-ray indicated numerous small opacities spread over the whole lung field and a large opacity in the right middle lung field. According to ILO classification, the shape of the small opacities was t/s, the profusion rate was 2/3 and the large opacity was classified into the B category. Following this diagnosis of silicosis, the patient's medical history and work exposure history were examined. According to his medical history, he had undergone closed thoracostomy in 2006 because he had suffered pneumothorax twice (in 2005 and 2006) and his smoking history was 7 pack years. In particular, he had been exposed to silica dust for 20 years in his workplace.
CONCLUSION
Despite the absence of any specific risk factor that caused pneumothorax, the patient suffered this condition three times. All clinical results and the progress of his physical symptoms, including radiologic findings from chest X-ray and computed tomography, clearly supported the diagnosis of silicosis. Except for exposure to silica dust in the workplace, no other risk factors causing silicosis were found. Therefore, he was finally diagnosed as having silicosis caused by exposure to silica dust in the workplace and followed by pneumothorax.

17 View
0 Download

Original Article

The Effect of Silica Dust on Ventilatory Function in Foundry Workers: Jung Wan Koo, Kyoung Ah Kim, Chee Kyung Chung; Korean Journal of Occupational and Environmental Medicine 1998;10(1):94-104. Published online February 28, 1998; DOI: https://doi.org/10.35371/kjoem.1998.10.1.94

Abstract PDF: In order to study the exposure level of silica dust and the effects of silica dust on ventilatory function, respirable dust samples were collected by personal air samplers using NIOSH method 0500 from the selected foundry operations, and ventilatory function tests were performed on 209 male foundry workers and 239 male control subjects. Ventilatory indices such as forced vital capacity (FVC) , one-second forced expiratory volume (FEV1), ratio of FEV1 to FVC(FEV1 %), maximal mid-expiratory flow(MMF), peak expiratory flow rate (PEFR) and maximal expiratory flow at 25, 50 and 75 % of expired FVC (FEF25, FEF50, FEF75 were obtained by analyzing forced expiratory spirogram and maximal expiratory flow-volume curve which were simultaneously measured by Vitalography in standing position. The results were as follows : 1. The average quartz concentrations of respirable dust were the highest in melting operation (0.079 mg/m3) and followed by molding operation (0.051 mg/m3), finishing operation (0.041 mg/m3) and coremaking operation (0.023 mg/m3) in the descending order. 2. No significant differences for mean values of all ventilatory indices expressed as percent of predicted value were demonstrated between smokers and nonsmokers In foundry workers and control subjects. 3. Mean values of all ventilatory indices except FVC of foundry workers were significantly lower than those of control subjects. 4. Mean values of FEV1 %, MMF, FEF25, FEF50 and FEF75 expressed as percent of predicted value tended to decrease with increasing cumulative dust exposure. 5. In foundry workers, proportions of workers with low MMF, FEF50 and FEF75 were markedly higher than those with other indices, and were significantly increased with increasing cumulative dust exposure. 6. In foundry workers, 2 workers(1.0 %) were diagnosed as silicosis and the profusion of radiographic opacities were category 1/0 and q type. With the above considerations in mind, it suggested that increasing exposure of silica dust be associated with progressive deterioration in ventilatory function of an obstructive nature and that MMF, FEF50 and FEF75 be more sensitive indices in the detection of the early obstructive changes of air flow of workers exposed to silica dust.

20 View
0 Download

First
Prev
Page of 1
Next
Last

Search