-
Review on Potential Risk Factors in Wafer Fabrication Process of Semiconductor Industry
-
Dong Uk Park, Hyae Jeong Byun, Sang Jun Choi, Jee Yeon Jeong, Chung Sik Yoon, Chi Nyon Kim, Kwon Chul Ha, Doo Yong Park
-
Korean Journal of Occupational and Environmental Medicine 2011;23(3):333-342. Published online September 30, 2011
-
DOI: https://doi.org/10.35371/kjoem.2011.23.3.333
-
-
 Abstract
 PDF
- OBJECTIVES
To associate work in the semiconductor industry, including silicon wafer fabrication, with cancer risks or mortality and other adverse health effects, the operation of wafer fabrication should initially be understood. A detailed study on the fabrication operation allows retrospective exposure to be assessed and wafer fabrication workers to be classified into similar exposure groups. Therefore, the objective of this study was to comprehensively review silicon wafer fabrication operations and related hazardous materials and agents.
METHODS
The literatures related to semiconductor industry processes were reviewed from an occupational health viewpoint based on wafer manufacturing, wafer fabrication and packaging. The focus was especially related to the hazardous materials used in wafer fabrication industries.
RESULTS
During the fabrication of silicon wafers, many toxic chemicals, a strong electric field and hazardous equipment are used. The process allows the integration of a three-dimensional array of electric circuits onto a silicon wafer substrate. Wafers are sliced from single crystal silicon and subject to a series of steps during the fabrication process, which alternatively adds and then selectively removes materials in layers from the surface of the wafer to create different parts of the completed integrated circuit. There are four major steps in this process; patterning, junction formation, thin film and metallization.
CONCLUSIONS
In order to associate exposure to the hazard agents generated during wafer fabrication operations with adverse health effects the details of the operation should be completely studied, which will be helpful in both exposure assessments and epidemiological studies.
-
Citations
Citations to this article as recorded by  - Assessment of Occupational Health Risks for Maintenance Work in Fabrication Facilities: Brief Review and Recommendations
Dong-Uk Park, Kyung Ehi Zoh, Eun Kyo Jeong, Dong-Hee Koh, Kyong-Hui Lee, Naroo Lee, Kwonchul Ha
Safety and Health at Work.2024; 15(1): 87. CrossRef - Sintering of silver nanoparticle structures and the pursuit of minimum resistivity
Arif Hussain, Hee Lak Lee, Seung Jae Moon
Materials Today Communications.2023; 34: 105159. CrossRef - Lymphohematopoietic cancer mortality among Korean semiconductor manufacturing workers
Dong-Wook Lee, Sooyoung Cho, Aesun Shin
BMC Public Health.2023;[Epub] CrossRef - Temperature Estimation during Pulsed Laser Sintering of Silver Nanoparticles
Arif Hussain, Hee-Lak Lee, Yoon-Jae Moon, Heuiseok Kang, Seung-Jae Moon, Jun-Young Hwang
Applied Sciences.2022; 12(7): 3467. CrossRef - Stepwise Current Increment Sintering of Silver Nanoparticle Structures
Dongkeun Kim, Arif Hussain, Hee-Lak Lee, Yoon-Jae Moon, Junyoung Hwang, Seung-Jae Moon
Crystals.2021; 11(10): 1264. CrossRef - Chemical use in the semiconductor manufacturing industry
Sunju Kim, Chungsik Yoon, Seunghon Ham, Jihoon Park, Ohun Kwon, Donguk Park, Sangjun Choi, Seungwon Kim, Kwonchul Ha, Won Kim
International Journal of Occupational and Environmental Health.2018; 24(3-4): 109. CrossRef - Comparative Analysis between Direct-reading Meter of PID and GC-FID using the Active Type Air Sampler for VOCs Measurement
Jin-Hee Yeo, Kwang-Min Choi
Journal of Korean Society of Occupational and Environmental Hygiene.2016; 26(3): 301. CrossRef - Review of Hazardous Agent Level in Wafer Fabrication Operation Focusing on Exposure to Chemicals and Radiation
Donguk Park
Journal of Korean Society of Occupational and Environmental Hygiene.2016; 26(1): 1. CrossRef - Clean Room Structure, Air Conditioning and Contamination Control Systems in the Semiconductor Fabrication Process
Kwang-Min Choi, Ji-Eun Lee, Kwi-Young Cho, Kwan-Sick Kim, Soo-Hun Cho
Journal of Korean Society of Occupational and Environmental Hygiene.2015; 25(2): 202. CrossRef - A Design of the Ontology-based Situation Recognition System to Detect Risk Factors in a Semiconductor Manufacturing Process
Seung-Min Baek, Min-Ho Jeon, Chang-Heon Oh
The Journal of Korea Navigation Institute.2013; 17(6): 804. CrossRef - Occupational Cancers with Chemical Exposure and their Prevention in Korea: A Literature Review
Kyung-Taek Rim
Asian Pacific Journal of Cancer Prevention.2013; 14(6): 3379. CrossRef - Ecotoxicity Estimation of Hazardous Air Pollutants Emitted from Semiconductor Manufacturing Processes Utilizing QSAR
Hyung-Geun Park, Min-Kyeong Yeo
Bulletin of the Korean Chemical Society.2013; 34(12): 3755. CrossRef - Leukemia and non-Hodgkin lymphoma in semiconductor industry workers in Korea
Inah Kim, Hyun J. Kim, Sin Y. Lim, Jungok Kongyoo
International Journal of Occupational and Environmental Health.2012; 18(2): 147. CrossRef
-
29
View
-
2
Download
-
13
Crossref
|
KSOEM
